logo
搜索
Search
img
新闻中心

The importance of hardware in doors and windows

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-12-29 14:22
  • Views:

(Summary description)Window stays, hinges, handles, buttons and other hardware in doors and windows are probably ignored by many people, but the quality of the hardware will completely affect the normal use of doors and windows. How do they affect it?

The importance of hardware in doors and windows

(Summary description)Window stays, hinges, handles, buttons and other hardware in doors and windows are probably ignored by many people, but the quality of the hardware will completely affect the normal use of doors and windows. How do they affect it?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2020-12-29 14:22
  • Views:
Information
Window stays, hinges, handles, buttons and other hardware in doors and windows are probably ignored by many people, but the quality of the hardware will completely affect the normal use of doors and windows. How do they affect it?
 
1. In fact, the quality of door and window hardware will directly affect the life of the entire window. The quality of door and window hardware will also have a positive impact on the life of doors and windows. Generally speaking, the service life of anti-corrosion and rust-proof hardware is 10 years, which is sufficient for the normal construction of doors and windows. Experts pointed out that good hardware should look rich, with good surface radiance, dense shielding, and no signs of scratches. The most important point is that the opening should be maneuverable.
 
2. Door and window hardware will affect the physical properties of doors and windows. The long-term physical properties of doors and windows are directly related to the layout and performance of door and window hardware. After the casement revolving window entered the door and window industry in our country, due to its excellent physical and utilization properties, this type of window has gradually become the Chinese people. The inspection effect proved that the air-tightness and water-tightness of the building doors and windows with the opening method can reach the first level of the national standard. At present, the structure of this hardware and profile system used in the door and window industry in my country is largely the same as the current system in Europe. Its characteristic is that in addition to the four sides of the window sash can be locked at the same time, the hardware system can realize the three-dimensional adjustment of the window sash relative to the window frame, which guarantees the best performance of the door and window.
 
3. Door and window hardware will affect the economic performance of doors and windows. There is also fierce market competition in the building door and window industry. One of the tense ways to break away from single-cost competition and create a benign market situation is to continuously enrich product functions and use technical advantages to expand product profit margins. The key to enriching the efficacy of door and window products is the door and window hardware. In addition to the above-mentioned side-opening and flipping hardware, the parallel push-pull upper suspension and the lifting push-pull, as well as the sunroof and middle-hung window accessories are all new hardware systems introduced to my country from Europe in recent years. At the same time, the hardware of the same opening method has a different layout and matched with the corresponding profile of d. Products with different materials also provide the market with multiple choices due to their different costs.
img

Related News:

The importance of hardware in doors and windows

The importance of hardware in doors and windows

Window stays, hinges, handles, buttons and other hardware in doors and windows are probably ignored by many people, but the quality of the hardware will completely affect the normal use of doors and windows. How do they affect it?
Hardware common sense: screw strength torsion test

Hardware common sense: screw strength torsion test

Screw strength test: 1. Turning force test: The twisting force of a product shows its ability to resist being twisted in half. Various standards have minimum requirements for the torsion force of self-tapping screws. In this test, the screw is clamped in a chuck with a tapped middle part on the torsion test tool, and then a torque wrench is used to apply force until the screw is twisted. If the torque does not exceed the minimum requirement, the product is unqualified. Unqualified indicates that the screw is too soft or the thread diameter is too small. 2. Locking test: This test is to lock the screw to a test board, this board has the specified hardness, thickness and aperture. If the screw is locked through the test board, but the thread is deformed, the product is not qualified. Unqualified indicates that the surface hardening treatment of the screw is too shallow or too soft. 3. Locking torque test: This test is only required for the screw rolled by the screw. When the lock test is performed, the minimum lock torque of the test board is observed. If the torque exceeds the specified standard value (the standard value is based on the size of the screw and the surface treatment), the product is not qualified. Unqualified shows that the surface of the screw does not have enough lubricity, or the thread is formed improperly and requires more torque.
Basic knowledge of Phillips screwdriver specification selection

Basic knowledge of Phillips screwdriver specification selection

Phillips screwdrivers generally have 7 specifications from small to largest ph000 ph00 ph0 ph1 ph2 ph3 ph4 The approximate relationship between the diameter of the screwdriver shaft and the specifications: 4mm~4.5mm rods generally do cross Ph1, which can cover ph000 ph00 ph0 ph1 This series is basically a precision series, disassembly and assembly of small electronic devices, glasses, watches, radios, tape recorders, etc.. Must! This is mainly a set, of which ph000 is very small, not a lot of use The 6mm rod is generally used for the Phillips Ph2 specification. This is the most commonly used specification in the medium-sized screwdriver, so you can buy one separately and use it for the fastening screws of the display, radio, TV and other housings, transformer fixing, etc. It is also a Ph2 head that makes furniture door screws. The 8mm rod is used for Ph3, and the 10mm rod is used for Ph4. Basically, it may be used in mechanical equipment. It is rarely used in electronic assembly, unless it is used as an electric box controller... So the combination scheme of Phillips screwdriver configuration is roughly: Precision screwdriver set below 4mm rod + a separate Ph2 screwdriver If you consider that the handle of the suit is too thin to focus on, you can also configure a Ph1 screwdriver separately. It is not a problem if it is not configured. Nothing is too particular about a word There are many types of star batches, and the general suits start from T6, but some modern mobile phones have the smallest use of T5, so generally suit + T5 can hit the world. About the material experience: From lowest to highest Medium carbon steel-high carbon steel-crv- S2- S2 plus titanium oxide coating-S2 plus diamond coating. For example, wera's most high-end Beatles can increase friction after using diamond coating without increasing the force or slipping screws.
logo

Copyright © Jiangmen Jinhe Hardware Products Co., Ltd. 粤ICP备18077102号

Address: E1, Self-edited Second District, Building 1, No. 8, Fengtai 2nd Road, Tangxia Town, Pengjiang District, Jiangmen City

Technical support: www.300.cn Jiangmen